How to Pick the Right Infrared Heater for Your Bathroom
Let’s be honest: nobody likes stepping out of a hot shower into a freezing bathroom. It’s the worst part of the morning. But before you just grab the biggest heater you can find, you need to think about the size of your room. If you go overkill in a tiny space, you’re just wasting electricity—or worse, tripping your breakers. On the flip side, if you under-power the room, you’ll still feel that annoying chill on your skin.
Getting the Power Right
It mostly comes down to how much space you’re dealing with. If you’ve got a small powder room (under 4m²), a 400W to 600W shortwave lamp usually does the trick. It hits you with warmth almost instantly. For those mid-sized bathrooms (4m² to 8m²), you’ll want to bump it up to 800W or 1000W. Now, if you have a massive master bath (over 10m²), here is a pro tip:don’tjust buy one giant 2000W lamp. That usually creates one scorching “hot spot” while the rest of the room stays cold. Instead, spread out a few 600W units along the walls. It feels much more like a warm blanket wrapping around you.
A Few Things to Watch Out For
More wattage means the room gets warm faster, but it also puts more pressure on your wiring. Just make sure your electrical setup can actually handle the load. Since you’re likely looking at shortwave lamps—which give you that “instant hit” of heat—keep in mind they glow. If you mount the heater right at eye level, it can be blinding. If that’s the case, just grab a hooded reflector. Your eyes will thank you.
Making the Most of Your Heat
You can actually get more warmth out of the same wattage just by changing the angle. Try mounting the heater at a 45-degree angle. This pushes the heat toward the floor and your body, rather than wasting energy heating up a cold tile wall. And since nobody needs a heater running in an empty room, toss in a timer or a motion sensor. It kills the power the second you leave, so you aren’t paying to heat the air for no reason.